Belt Weight Indicator 101

This is an important component of conveyor/Belt weighing system. It is based on a popular 8-bit micro controller. The system monitors input and display flow rate. It also integrates input over a period of time. This integrated total is non resettable.

SPECIFICATIONS :

• Input : Load cell, Proximity (PNP type)
• Display: 14 Digit 7-segment 0.56” Red LED display organised in three groups.
  • Aggregate Rate (Tons/Hour): 4 Digits
  • Conveyor Speed (Meter/Sec): 3 Digits
  • Total aggregate (Tons): 8 Digits
• Non-resettable eight digit Totaliser (Reset possible only thro’ Password)
• Keypad: Eight keys membrane keypad
• Descrete LEDs: Two
• Power Supply: 110-230VAC  +/- 10%
• Proximity power supply: +24V DC/50 mA
• Output Options: 0 to 10 V DC
  • Relays: One for alarm condition
• Serial interface: RS232 or RS485 (Optional)
• Scaling method: Linear (Multiplying factors: Programmable)
• Warm up time: 10 Minutes
• Accuracy: 0.1% of FS +/- 1 Digit
• Enclosure: Metalised DIN standard, Panel Mounting type
• Dimensions:
  • Outer: 144 (W) x 144 (H) x 120 (D)
  • Cutout: 138 mm x 138 mm